很多朋友在输入路由器管理地址的时候,习惯性的带上www.192.168.1.1会发现这样是打不开路由器的管理地址的,为什么会出现www.192.168.1.1打不开的情况呢? 正常的能打开的路由器的管理地......
h3c端口批量加入vlan命令_华三批量配置端口vlan
华为、华三H3C交换机如何将端口、接口多个批量加入Vlan?可能很多新手不知道在哪个配置模式视图下去操作,下面小编就给大家分享H3C交换机批量配置端口Vlan命令,帮助各位同学快速学习交换机入门。
方法步骤:
进入对应的Vlan 视图,输入以下命令:
- <H3C>system-view
- [H3C]vlan 88
- [H3C-vlan88]port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/10
- [H3C-vlan88]save
命令解析:
system-view:进入 系统视图 才有权限配置交换机,发生的变化和辨别方法就是:<H3C>由尖括号变为:[H3C] 中括号
vlan 88:进入Vlan 配置模式,进入Vlan 88,没有该Vlan 将自动创建Vlan 88
port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/10:将交换机 千兆口1口至10口 加入批量加入 Vlan 88
save:保存配置,根据以下提示回答:Y
- The current configuration will be written to the device. Are you sure? [Y/N]:y
- Please input the file name(*.cfg)[flash:/startup.cfg]
- (To leave the existing filename unchanged, press the enter key):
- flash:/startup.cfg exists, overwrite? [Y/N]:y
- Validating file. Please wait.......................
- The current configuration is saved to the active main board successfully.
- Configuration is saved to device successfully.
配置过程如下图所示:
查看并验证我们交换机的:千兆口1至10口是否被加入Vlan 88,输入以下命令查看 Vlan下的接口
- [H3C]display vlan 88
如下图所示:
相关文章
- 详细阅读
- 详细阅读
- 详细阅读
- 详细阅读
-
如何通过三层交接机为公司多个VLAN自动分配IP地址详细阅读
当企业内电脑太多或者变动性很大,通过手动给每台计算机终端分配IP地址,工作量太大,可以通过DHCP给公司网络中不同VLAN的终端PC自动分配IP地址。 Huaweisystem-view [Huawei]vlan 10 [Huawei]......
2022-06-09 201 层交接机 多个VLAN自动分配IP地址